Philips RFX6500 User manual - Page 20
Specifications - rfx 6500
UPC - 037849966556
View all Philips RFX6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Specifications The specifications and design of this product are subject to change without notice. EN Hardware Blaster unit Hardware Receiver unit Dimensions Blaster unit Dimensions Receiver unit Dimensions antenna Operating temperature Infrared (IR) Radio Frequency (RF) Dual IR emitters Power adapter Accessories User Guide 17 Red LED (continuously on when powered, blinking during IR emission) 16 IDs and 4 CHs 4 outputs for IR emitters Input for Receiver unit Possibility of having multiple RF extenders in one home not interfering Positioning: freestanding, mounted horizontally or hanging up side down Red LED (blinking when receiving RF commands and RF interference) Output for Blaster unit RF antenna 4.5 x 3.2 x 1.1 inch (112.9 x 81.2 x 26.8 mm) 3.0 x 2.9 x 0.9 inch (77 x 73 x 23.5 mm) Extended: 0.7 inch (17.7 mm) Retracted: 0.4 inch (9.7 mm) Fully rotatable (360°) 32°F to 122°F (0°C to 50°C) Operating distance: 16.4 ft - 22.9 ft (5-7 meters) IR frequency range: DC/flash codes, 25kHz-100kHz Operating distance: 147.6 ft (45 m) outdoor Number of IR emitters : up to 8 (4x2), emitters wired in series 3.5 mm mono mini-plug Cable length: 10 ft (2.5 meters) Min. range: 3 ft (75 cm) RFX 6500: 120V / 60 Hz AC Power adapter (400mA/12V DC adapter, UL-approved) SBC LI910: 230V / 50 Hz AC Power adapter (400mA/12V DC adapter, CE-approved) Connection cable (standard shielded stereo audio cable, 2.5 mm male jacks on both sides, up to 20 ft / 6 m) Dual IR emitters Power adapter Mounting kit (Plate and screws)