Philips SRP4004 User manual - Page 12

4 Service and support H d 4.1 Frequently asked questions In this chapter you will find answers to the most frequently asked questions about your universal remote control. Setup I cannot enter setup mode. T Battery level too low or battery lifetime came a to an end. B • Replace the batteries. See chapter 2.1. t • The brand code for my device is missing in the 'Shortlist of brands' in the Quick Start Guide. T The 'Shortlist of brands' only mentions the most a common TV, DVD, CBL/SAT and VCR brands. c • You will find a complete brand list on page • 44-55 of this user manual. • Use '9999' as 4-digit code in case you cannot • find your brand in the complete brand list. Note that using '9999' may result in a long W setup (up to 15 minutes). • My TV switches OFF in step 4 but does not switch ON again in step 5. TVs of some brands (e.g. Panasonic) only switch ON after a long press on one of the digit keys. After a long key press in setup mode the remote control will start trying to improve the key (see chapter 2.3.2) instead of switching ON the TV. • In this case, switch ON the TV manually or use the original remote control for this. Continue with step 6. After successfully W completing setup, the remote control will b switch ON the TV with a long key press on N one of the digit keys, just as your original remote control. After setup, not all keys work as expected. • Try improving the key(s). See chapter 2.3.2. 12 EN 04_27__Manual_80_210.indd 12 25-09-09