Philips SRP4004 User manual - Page 8
Improving keys - remote
UPC - 609585173415
View all Philips SRP4004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2.3.2 Improving keys 4 When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the • first time it might occur that some keys do not yet function as expected. In this case you can have the remote control search for alternatives. 5 Note Improving keys is not possible when the code was found during full database search (with code '9, 9, 9, 9'). During initial setup 1 M ake sure the receiving device is able to respond. E.g. when you try to repair the Play key for your DVD player, make sure to insert 3 a DVD into the DVD player otherwise the Play key is not able to function. 2 Press the key that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every key 3 that does not function. T • If the key still does not function as expected, a try pressing it again for a longer period of time. After initial setup 1 M ake sure the receiving device is able to respond. E.g. when you try to repair the Play key for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play key is not able to function. 2 Select the device that you wish to operate (e.g. DVD). P ress the device selection key to select DVD. 3 Keep keys and 5 sec. pressed simultaneously for 3 5 seconds. • The red Setup light lights up.The remote control is now in setup mode. 8 EN 04_27__Manual_80_210.indd 8 25-09-09