Philips SRP4004 User manual - Page 9

English Using the universal remote control 4 P ress and hold the key that does not function and immediately release it when the device responds. • If the key still does not function as expected, try pressing it again for a longer period of time. 5 Press the device selection key twice to save your settings and exit setup mode. 2 x • W  hen no key is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings. 3 Using the universal remote control 3.1 Keys and functions The illustration on page 2 gives an overview of all keys on the remote control.Try out the keys you need for operating your devices. Notes • Keys having the same functions as the keys on your original remote control may have different namings on the SRP4004 (e.g. Info / Display). • Only functions that are available on your original remote control can be used for operating your devices with the SRP4004. 1 Setup light. Lights up red when the remote control is in setup mode. 2 selects available source inputs (antenna, cable, etc.). 3 ......... device selection keys. • select the device to be operated. • light up when a remote control command is being sent. EN 9 04_27__Manual_80_210.indd 9 25-09-09