Philips SWW1800/27 User Manual
Philips SWW1800/27 Manual
 |
View all Philips SWW1800/27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Philips SWW1800/27 manual content summary:
- Philips SWW1800/27 | User Manual - Page 1
Register your product and get support at www.philips.com/welcome SWW1800/27 EN User manual - Philips SWW1800/27 | User Manual - Page 2
- Philips SWW1800/27 | User Manual - Page 3
of your HDTV 12 LED indicator status of the receiver 12 Activate the wireless link 12 Enter the standby mode 14 5 Position the transmitter and receiver 16 6 Wallmount the receiver 17 7 Technical data 18 Supported resolution 18 Product specifications 18 8 Troubleshooting 20 EN - Philips SWW1800/27 | User Manual - Page 4
openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat literature closely to prevent operating and maintenance problems. Warning •• To reduce the risk of time. n Refer all servicing to qualified service personnel. Servicing is required when the apparatus - Philips SWW1800/27 | User Manual - Page 5
provided power supply. Manufacturer: SINO-AMERICAN Model: SA115B-05-A Interference information This device complies operation. Notice for USA This equipment has been tested and found to comply with the limits for a and used in accordance with the instruction manual, may cause harmful interference to - Philips SWW1800/27 | User Manual - Page 6
® program or at authorized Philips product service centers. Please call 1-800 Philips's involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC® is a registered trademark of Rachargeable Battery Recycling Corporation. HDMI, and HDMI - Philips SWW1800/27 | User Manual - Page 7
the support that Philips offers, register your product at www.philips. com/welcome. What is in the box Note •• Make sure you have all these items in the box. Contact your dealer for any missing or damaged items. HDMI cable Power adaptor x 2 Quick Installation Guide Quick start guide Transmitter - Philips SWW1800/27 | User Manual - Page 8
IN connector 8 EN Rear view 2 1 DC IN HDMI OUT 1 HDMI OUT connector 2 Power IN connector The SWW1800 gives you a total wireless solution to place your HDTV set or projector anywhere you want. With the built-in omnidirectional antenna, the transmitter can transmit an uncompressed video content - Philips SWW1800/27 | User Manual - Page 9
English Note •• The transmitter can support two devices running on HDMI cable and another two running on YPbPr component video signals at the same time. • Connect the receiver to your HDTV set. • Control the transmitter with the remote control. EN 9 - Philips SWW1800/27 | User Manual - Page 10
end of the power adapter (included) to the DC IN connector of the SWW1800 transmitter. Connect the other end of the power adaptor to a mains socket. »» The power LED indicator lights up in solid blue. The HDMI devices and analog devices with the component and stereo RCA start connecting. 1 Connect - Philips SWW1800/27 | User Manual - Page 11
English Install remote control batteries Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Risk of decreased battery life! Never mix different brands or types of batteries. •• Risk of product damage! When the remote control is not - Philips SWW1800/27 | User Manual - Page 12
up the link Turn on the power of your HDTV 1 Go to the source menu under the settings menu of your HDTV. 2 Select the HDMI input to which the receiver is connected.. DC 5V Note •• You cannot control the receiver with the supplied remote control and the receiver follows the transmitter's status to - Philips SWW1800/27 | User Manual - Page 13
to find the video device On screen display (If TV supports CEC) LINK START & LINK VERIFY NoModeSupport NO SIGNAL Select the source on the transmitter Press the source buttons: 1 HDMI , 2 HDMI, 3 INPUT, 4 INPUT on the remote control or transmitter until you see the available video from your device - Philips SWW1800/27 | User Manual - Page 14
of the LED indicators, see the section on "Troubleshooting". Enter the standby mode You can choose between 2 standby modes on the transmitter: the listen mode and sleep mode. If your HDTV and HD devices are CEC compliant: (see the user manual of your HDTV and HD devices for more information) - Philips SWW1800/27 | User Manual - Page 15
and that the HDTV and HD device are activated. Tip •• To switch on the HDTV, you can also press the HDMI source button of your HDTV remote control ( manual of your HDTV. Note •• One-touch play feature does not apply in sleep mode. LED indicator status in standby mode Mode Status of the transmitter - Philips SWW1800/27 | User Manual - Page 16
built to transfer the HD signal up to 20m or 66 ft. Its performance can be affected by its environment and the obstruction between the transmitter and receiver. • If you use a 5 GHz WLAN or cordless phone, it is possible to have interferences. Press CHANNEL on the remote control to adjust the - Philips SWW1800/27 | User Manual - Page 17
English 6 Wallmount the receiver You can either place the receiver near the HDTV or mount it on the wall. 1 Choose a spot near the TV. 2 Drill two holes in the wall. Ensure the distance between the two holes is 4. - Philips SWW1800/27 | User Manual - Page 18
Supported resolution Video resolution and frequency 480i 480i 480p 480p 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p VGA SVGA XGA HDMI specifications General specification Video resolution 1080p @ 24/25/30 Hz, 600, VGA: 640 x 480 Supported audio formats: Analog audio: 48KHz antennas HDMI: - Philips SWW1800/27 | User Manual - Page 19
Status LED Source LED Dimensions 1 x LED (Two Tone: Blue & Red) 4 x Blue LEDs 295(W)x 149(L)x 45.5(H) mm Transmitter interfaces A/V interfaces YPbPr input Analog audio L/R input HDMI input HDMI output Two sets of RCA connectors Two sets of RCA connectors Two (Type A) - Control signal interfaces - Philips SWW1800/27 | User Manual - Page 20
intermittent video problem or the picture quality is poor, what do I do? •• Ensure that the video resolution of your HD device can support 1080p @ 24/25/30 Hz, 1080i, 720p, 576p, 576i, 480p, 480i. Note •• Ensure your HDTV and HD device can support the same video resolution as SWW1800 •• Whether or - Philips SWW1800/27 | User Manual - Page 21
are CEC compliant. Alternatively, you can connect the HDTV and HD device with an HDMI cable instead of SWW1800 to see if it works fine first. When dealing with interference, the different channel settings are indicated on the Transmitter as follows: RF channel 1 2 3 4 5 6 7 8 9 10 LED indicator - Philips SWW1800/27 | User Manual - Page 22
data communications technology that enables faster data transmission over highspeed broadband networks. C CEC (Consumer electronics Control) CEC is part of the HDMI standard. If CEC is available in the source and HDTV devices in your home setup, the devices will be able to pass commands through the - Philips SWW1800/27 | User Manual - Page 23
- Philips SWW1800/27 | User Manual - Page 24
0682 © 2009 Koninklijke Philips Electronics N.V. All rights reserved. Printed in Taiwan SWW1800_27_UM_V3.0
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
Register your product and get support at
www.philips.com/welcome
SWW1800/27
EN
User manual