Philips SWW1800/27 User Manual - Page 10

3 Installation Connect the transmitter to your HD devices You can connect 4 video sources to the transmitter at the same time: two with the HDMI connection and two with the component connection, but only one source can be selected and played. DC 5V Note •• AUDIO L connection cable is often indicated by a white color on the connector and AUDIO R connection cable is indicated by a red color on the connector. 3 Connect the power adaptor to the transmitter • Connect one end of the power adapter (included) to the DC IN connector of the SWW1800 transmitter. Connect the other end of the power adaptor to a mains socket. »» The power LED indicator lights up in solid blue. The HDMI devices and analog devices with the component and stereo RCA start connecting. 1 Connect video source to the transmitter using the HDMI cable. • Connect one end of the HDMI cable (included) to the HDMI connector of the transmitter. 2 Connect the video source to the transmitter using the component cables • Connect one end of the RCA (green, blue and red) cables to the Y/Pb/Pr IN connectors of the transmitter. Connect the other end of the RCA cables to the corresponding Y/Pb/Pr OUT connectors of your HD devices. • Connect one end of the set of audio cables to the AUDIO L/R IN connectors of the transmitter. Connect the other end to the corresponding AUDIO L/R OUT connectors of your HD devices. 10 EN Connect the receiver to the HDTV set DC IN 5V HDMI OUT 2 1 HDMI OUT 1 Connect the receiver with an additional HDMI cable (not included): • Connect one end of the HDMI cable to the receiver. • Connect the other end to the HDMI OUT connector of your HDTV. 2 Connect the power adaptor to the receiver: • Connect one end of the power adapter (included) to the DC IN connector of the receiver. • Connect the other end of the power adaptor to a power socket.