Pioneer AVH-P5100DVD Installation Manual - Page 10
When connecting with a rear view camera - wiring
UPC - 012562944401
View all Pioneer AVH-P5100DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting the Units When connecting with a rear view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION • The screen image may appear reversed. • The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this function for entertainment purposes. • Objects in the rear view may appear closer or more distant than they actually are. This product Rear view camera input (REAR VIEW CAMERA IN) CAUTION You must use a camera which outputs mirror reversed images. Rear view camera 20 cm (7-7/8 in.) 15 cm (5-7/8 in.) RCA cable (sold separately) To video output Violet/white Fuse resistor Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards. Connection method 1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers. Note: • It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when connecting the rear view camera. 9