Pioneer AVHP5000DVD Owner's Manual - Page 35
Using the equalizer - car audio
UPC - 012562883489
View all Pioneer AVHP5000DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Operating this unit Section 03 Operating this unit 1 Touch FADER/BALANCE on the audio function menu. # When the rear output setting is S.W, BALANCE will be displayed instead of FADER/BALANCE. Refer to Setting the rear output and subwoofer controller on page 41. 2 Touch a or b to adjust front/rear speaker balance. Each time you touch a or b it moves the front/rear speaker balance towards the front or the rear. FRONT:15 to REAR:15 is displayed as the front/rear speaker balance moves from front to rear. # FR: 0 is the proper setting when only two speakers are used. # When the rear output setting is S.W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 41. 3 Touch c or d to adjust left/right speaker balance. Each time you touch c or d it moves the left/ right speaker balance towards the left or the right. LEFT:15 to RIGHT:15 is displayed as the left/ right speaker balance moves from left to right. Using the equalizer The equalizer lets you adjust the equalization to match the car's interior acoustic characteristics as desired. Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves. Display POWERFUL NATURAL VOCAL CUSTOM Equalizer curve Powerful Natural Vocal Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting is memorized in CUSTOM. ! When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: POWERFUL-NATURAL-VOCAL-CUSTOM -FLAT-SUPER BASS Adjusting equalizer curves You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HIGH). ! The actual range of the adjustments are dif- ferent depending on which equalizer curve is selected. Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Touch PARAMETRIC EQ on the audio function menu. 2 Touch c or d next to EQ SELECT to select an equalizer curve. POWERFUL-NATURAL-VOCAL-CUSTOM -FLAT-SUPER BASS 3 Touch c or d next to BAND to select the equalizer band to adjust. LOW (low)-MID (mid)-HIGH (high) En 35