Pioneer AVHP5000DVD Owner's Manual - Page 47

Operating this unit Section 03 Operating this unit 2 Touch AUTO FLAP to select the display to open/close automatically or manually. Each time you touch AUTO FLAP it switches between the following settings: ! ON - The LCD panel will be opened or closed automatically with the turning of the ignition switch on or off ! OFF - You have to press OPEN/CLOSE to open/close the LCD panel Switching the iPod charge setting You can turn the iPod charge setting on or off while listening to an iPod. ! Listening AM radio while an iPod is charged from this unit may generate noise. In this case, turn the iPod charge setting off and noise is disappeared. ! Initially, this function is set to on. 1 Touch NEXT on the system menu. 2 Touch iPod CHARGE to turn the iPod charge setting on. # To turn the iPod charge setting off, touch iPod CHARGE again. Note For maximum performance, we recommend that you use the latest version of the iPod software. Selecting the OSD color You can change the OSD color. 1 Touch NEXT on the system menu. 2 Touch OSD COLOR to select the desired color. BLUE (blue)-RED (red)-AMBER (amber)- GREEN (green)-VIOLET (violet) Selecting the illumination color You can select a desired color from red and blue. 1 Touch NEXT on the system menu. 2 Touch ILLUMI COLOR to select the desired color. BLUE (blue)-RED (red) Adjusting the response positions of the touch panels (Touch Panel Calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel. There are two adjustment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen. ! Make sure to use the supplied pen for ad- justment, and gently touch the screen. If you press the touch panel forcefully, the touch panel may be damaged. Do not use a sharp pointed tool such as ballpoint pen or a mechanical pen. Otherwise the screen is damaged. ! If touch panel adjustment cannot be performed properly, consult your local Pioneer dealer. 1 Touch the source icon and then touch OFF to turn this unit off. # When the source icon is not displayed, you can display it by touching the screen. 2 Press and hold EJECT (h). The 4-point touch panel adjustment screen appears. 3 Touch each of the arrows on the four corners of the screen with the touch panel adjustment pen. # To cancel the adjustment, press and hold VOLUME/MUTE. 4 Press EQ to complete the 4-point adjustment. The adjusted position data is saved. # Do not turn off the engine while saving the adjusted position data. En 47