Pioneer AVIC-F90BT Installation Manual - Page 25

When installing the antenna, outside the vehicle on the body

Page 25 highlights

Installation When installing the antenna outside the vehicle (on the body) Put the GPS antenna in a position as level as possible, such as on the roof or trunk lid. (The GPS antenna is fastened with a magnet.) GPS antenna English Section 04 When routing the lead in from the top of the door Make a U-shaped loop in the lead on the outside to prevent rainwater from flowing along the lead into the interior of the vehicle. Clamps Use clamps to secure the lead where necessary inside the vehicle. When routing the lead in from inside the trunk Waterproof pad Make sure the waterproof pad contacts the top of the rubber packing. Clamps Use clamps to secure the lead where necessary inside the vehicle. Rubber packing Make a U-shaped loop in the lead outside the rubber packing to prevent rainwater from flowing along the lead into the interior of the vehicle. En 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

When installing the antenna
outside the vehicle (on the body)
Put the GPS antenna in a position as level as
possible, such as on the roof or trunk lid. (The
GPS antenna is fastened with a magnet.)
GPS antenna
Clamps
Use clamps to secure
the lead where
necessary inside the
vehicle.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
When routing the lead in from the top of the
door
When routing the lead in from inside the trunk
Waterproof pad
Make sure the waterproof pad
contacts the top of the rubber
packing.
Rubber packing
Make a U-shaped loop in the lead
on the outside to prevent rainwater
from flowing along the lead into the
interior of the vehicle.
Make a U-shaped loop in the
lead outside the rubber
packing to prevent rainwater
from flowing along the lead
into the interior of the vehicle.
Installation
En
25
English
Section
04