Pioneer AVIC-F90BT Installation Manual - Page 7
Parts supplied, Connecting the System - remote
UPC - 012562897271
View all Pioneer AVIC-F90BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting the System Section 03 English - Change the source from radio (AM or FM) to another source. - Turn the source off - Turn off the ignition switch (ACC OFF) ! If [Ant CTRL] mode is set to [Power], the vehicle's antenna can be stowed or turned off only when the ignition switch is turned off (ACC OFF). ! Do not connect this lead to the system control terminal of external power amps. ! Be sure not to use this lead as the power supply lead for the auto-antenna or antenna booster. Such connection could cause excessive current drain and malfunction. Connector Extension lead (for speed signal) Notice for the blue/white lead ! When the ignition switch is turned on (ACC ON), a control signal is output through the blue/white lead. Connect to an external power amp's system remote control terminal (max. 300 mA 12 V DC). The control signal is output through the blue/white lead, even if the audio source is switched off. ! Do not connect this lead to the auto-antenna relay control terminal or the antenna booster power control terminal. ! Be sure not to use this lead as the power supply lead for the external power amps. Such connection could cause excessive current drain and malfunction. RCA connector Extension lead (for reverse signal) GPS antenna Microphone Parts supplied The navigation unit Power cord En 7