Pioneer AVIC-F90BT Installation Manual - Page 28
After Installing this, Navigation System, After Installation - reset
UPC - 012562897271
View all Pioneer AVIC-F90BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Section 05 After Installation After Installing this Navigation System 1 Reconnecting the battery. First, double-check that all connections are correct and that this product is installed correctly. Reassemble all vehicle components that you previously removed. Then reconnect the negative (-) cable to the negative (-) terminal of the battery. 2 Start the engine. 3 Press RESET button. Press RESET button on the navigation unit using a pointed object such as the tip of a pen. 4 Make the following settings: = For details concerning operations, refer to "Operation Manual". 1 Set the language. 2 Drive an unobstructed road until the GPS starts receiving the signal normally. 3 Make some necessary adjustments. ! Setting the time ! Setting the units and the date format, etc. ! Change other settings as you prefer Note After installing this navigation system, be sure to check at a safe place that the vehicle is performing normally. 28 En