Pioneer BDP-330 Owner's Manual - Page 59

Troubleshooting To Reset this Player • If the player displays the following symptoms, press and hold in  STANDBY/ON on the player's front panel to reset the player. - Operation buttons do not work - Noise is output - Power does not turn off When "RESET" appears on the front panel display, the player is reset and the power turns off. Turn the player's power back on. • When the power is turned on, it may take several minutes for system checking to be completed. • Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must be set again. • When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the problem, contact the nearest service center approved by Pioneer. Messages Relating to BD disc and DVD disc The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation is not correct. Error message Possible Error Suggested Solution Cannot play. • The disc cannot be played back with this Player. • Check the disc, and load it correctly. Incompatible disc. • A disc that cannot be played is loaded in the player. • The disc is scratched or dirty. • The disc is loaded with the printed side facing down (the disc tray opens automatically). • Occurs if the loaded disc cannot be • Remove the disc. played because it is a non-standard disc or scratched, etc. Cannot operate. • Occurs if an operation is incorrect. - This USB memory is not formatted • Occurs if there is a formatting error. properly. Please format the memory in USB memory management. • Format the USB memory again. The Connected USB Memory cannot be used. It should be compliant with USB 2.0. • Occurs if USB memory not compliant • Connect USB 2.0 High Speed (480 with USB 2.0 High Speed (480 Mbit/s) is Mbit/s) compliant USB memory. used (i.e. USB 1.0/USB 1.1). Appendix 59