Pioneer D814-K Installation Manual - Page 42

07 Setting up the receiver Chapter 7: Setting up the receiver Choosing your receiver setup To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly important when using DTS and Dolby surround. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers, etc.). Refer to the following pages for details on each of the settings. • If you are using the Pioneer S-FCRW730 speaker system, make sure the Subwoofer setting is set to YES and the Speaker setting is set to FS-CS-SS. You'll also have to change the Crossover frequency setting to 200Hz. DVD/LD TV/SAT DVR/VCR TVCONT MULTI CONTROL CD CD-R/TAPE TUNER RECEIVER INPUT ATT FL DIMMER +10 D.ACCESS TOP MENU SETUP SR DISC ENTER CLASS MENU DTV MENU T.EDIT ENTER MCACC SETUP BAND GUIDE TV CONTROL RETURN TV VOL INPUT SELECT TV CH VOL 1 Press RECEIVER. 2 Use or to choose the option you want to adjust. It will be easiest to adjust each of the settings in turn, following the order below (and on the following pages). The current setting is shown for each option as you cycle through the display. Speaker setting (page 43) Specify the number and type of speakers you have connected. Surround back speaker setting (page 44) Specify your surround back speaker/ surround back subwoofer setup. Subwoofer setting (page 44) Specify how the subwoofer is used. Crossover frequency setting (page 44) Determine which frequencies will be sent to the subwoofer (or large speakers). LFE attenuator setting (page 45) Choose the attenuator level for the LFE channel. Front left speaker distance setting (page 45) Specify the distance from your listening position to your front left speaker. Center speaker distance setting (page 45) Specify the distance from your listening position to your center speaker. Front right speaker distance setting (page 46) Specify the distance from your listening position to your front right speaker. 42 En