Pioneer DEH-P6800MP Owner's Manual - Page 55
Introduction of audio, adjustments, Using balance adjustment, Audio Adjustments - no power
UPC - 012562777597
View all Pioneer DEH-P6800MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Audio Adjustments Section 13 English Introduction of audio adjustments # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. 1 1 Audio display Shows the audio adjustment status. 1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option; press to select. The audio function name appears on the display. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL clockwise to switch between the audio functions in the following order: Fader (balance adjustment)Powerful (graphic equalizer adjustment)50Hz (7-band graphic equalizer adjustment)LOUD (loudness)Sub W.1 (subwoofer on/off setting) Sub W.2 (subwoofer setting)Bass (bass boost)HPF (high pass filter)SLA (source level adjustment) # You can also switch between the audio functions in reverse order by turning MULTI-CONTROL counterclockwise. # You can select the Sub W.2 only when subwoofer output is turned on in Sub W.1. # When selecting the FM tuner as the source, you cannot switch to SLA. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Use MULTI-CONTROL to select Fader. Fader appears in the display. # If the balance setting has been previously adjusted, Balance will be displayed. 2 Push MULTI-CONTROL up or down to adjust front/rear speaker balance. Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear. F 15 R 15 is displayed as the front/rear speaker balance moves from front to rear. # F/R 0 is the proper setting when only two speakers are used. # When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 62. 3 Push MULTI-CONTROL left or right to adjust left/right speaker balance. Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves towards the left or right. L 15 R 15 is displayed as the left/right speaker balance moves from left to right. En 55