Pioneer DV-47Ai Owner's Manual - Page 11
Home theater video connections, Connecting D Video and S-Video, cables, S-Video or composite video? - dv 47a
View all Pioneer DV-47Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connecting Up Home theater video connections This player outputs video in a number of different ways. Choose the one most suitable for your system using the guide below. 2 Important Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet. 1 If your TV has a component video input, we recommend using it to connect directly to the COMPONENT VIDEO OUT of this player. Use the standard 3-jack component video ouput (DVS733A only: you can also use the D1/D2 D-Video jack). DV-S733A VIDEO OUT D1 / D2 COMPONENT VIDEO OUT Y PB PR S-VIDEO OUT 1 VIDEO OUT 1 L AUDIO OUT (2CH) 1 2 FRONT AUDIO OUT (5.1CH) SURROUND L CENTER DIGITAL OUT CONTROL OPTICAL COAXIAL IN 2 2 R OUT R SUB WOOFER DV-47A AC Inlet. AC IN AC IN 2 If a component input is not available to you, connect this player to your TV or AV receiver using either the VIDEO or S-VIDEO jacks. Connecting D Video and S-Video cables D Video (DV-S733A only) and S-Video cables will only plug in one way, so make sure the plug is correctly lined up with the jack before inserting. Be sure to fully insert for a good connection. S-Video or composite video? S-Video should give a better picture, so if you have an S-Video input, use it. S-Video cables are available from any good audio/visual dealer. 11 En