Pioneer DV-49AV Owner's Manual - Page 46

08 Speakers settings Setting Audio Output Mode Option 2 Channel 5.1 Channel Speaker Distance - Speaker - Installation What it means The player outputs analog audio in stereo only. See also Audio Output Mode below. The player outputs 5.1 channel analog audio. See also Audio Output Mode below. Specify the distance of your speakers from your listening position. See also Speaker Distance on page 50. Specify the number and size of speakers in your system. See also Speaker Installation on page 51. Audio Output Mode • Default setting: 2 Channel Initial Settings Digital Audio Out Video Output Language Display Options Speakers Audio Output Mode Speaker Distance Speaker Installation 2 Channel 5.1 Channel If you connected this player to your amplifier using the 5.1 channel analog outputs (front, surround, center and subwoofer outs), set this to 5.1 Channel; if you connected only the stereo outs, set to 2 Channel. Note • Even if you set Audio Output Mode to 5.1 Channel, you'll only get sound from all speakers when playing a 5.1 channel multi-channel disc. • When set to 5.1 Channel, only the front left/ right channels are output from the AUDIO OUT (2ch) jacks. Change to 2 Channel if you want to listen to downmixed stereo audio (for example, because you are listening through the TV's built-in speakers). • When set to 5.1 Channel there is no digital output when playing DVD-Audio. • If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is mixed down to two channels so you still hear all the audio recorded on the disc. With DTS encoded audio, you can choose how the signal is downmixed to PCM audio. See DTS Downmix on page 45 to change the downmix setting. • Some DVD-Audio discs don't allow downmixing of audio. These discs always output multi-channel audio regardless of the setting made here. 46 En