Pioneer DV-49AV Owner's Manual - Page 49

HDMI output with DVD-Audio and SACD sources 08 The way audio sources are output from the HDMI terminal depends on the specification of the connected component. Components specification Example component Component SACD, DVD-Audio /output and 5.1 channel compatible on HDMI1 SC-09TX VSX-03TXH DVD-Audio and 5.1 channel compatible on HDMI1 VSX-94TXH VSX-92TXH DVD-Audio and 2 channel compatible on HDMI1 PDP-6020FD PDP-5020FD Incompatible with DVD-Audio on HDMI1 PDP-5050HD PDP-4350HD Disc format (DVD-Audio or SACD) 2ch 5.1ch 2ch 5.1ch2 SACD Auto (DSD) DSD 2ch/ 5.1 ch 2ch 5.1ch2 No sound 2ch Left/Right or No sound 2ch downmix3 No sound4 No sound4 No sound 1. This unit checks the specification of the connected component (such sample rate/multichannel limitations and compatibility with protected audio contents) and outputs the signal accordingly. Note that 'DVD-Audio compatible' indicates compatibility with protected audio contents. 'SACD compatible' indicates compatibility with DSD signals. 2. If HDMI Out setting (page 40) is set to LPCM (2CH), DVD-Audio multichannel sources will be downmixed to stereo. (In cases where the source is downmix-prohibited, only the front left/right channels are output.) For SACD sources, the 2 channel (stereo) SACD audio area is selected. If the video output resolution is 480i, 576i, 480p or 576p, audio output may be limited to 2 channel (depending to the connected component). 3. In cases where the source is downmix-prohibited, only the front left/right channels are output. 4. If CPPM shows in the front panel display, it means it is not possible to output CPPM copycontrolled DVD-Audio sources from the HDMI connection. Discs with no CPPM protection are limited to 2 channel output. 49 En