Pioneer DV-58AV Owner's Manual - Page 20

04 Chapter 4 Getting started Switching on and setting up 4 Press ENTER to start setting up using the Startup Navigator. When you switch the player on for the first time the Startup Navigator screen appears. We recommend using this to make a few basic player settings. 1 Switch on your TV and set the video input to this player. 2 Press the  STANDBY/ON button on the remote control or the front panel to switch on. If you don't want to use the Startup Navigator, press  to select Cancel, then press ENTER to exit the Startup Navigator. 5 Use the / buttons to select the terminal from which the audio signals are to be output, then press ENTER. • If you have selected Analog, proceed to step 6. • If you have selected COAX/OPT, proceed to step 7. • If you have selected HDMI or I don't know, proceed to step 8. 6 Use the / buttons to select whether to output the analog audio signals from the 2ch or 5.1ch audio outputs, then press ENTER. • When you switch on for the first time, your TV should display the Startup Navigator screen. • When you have this unit connected to a plasma display that is compatible with HDMI Control, language settings are imported from the plasma display's OSD settings before Startup Navigator begins. 3 Use the / buttons to choose a language, then press ENTER. 7 Use the / buttons to select whether or not to convert the digital audio signals output from the DIGITAL AUDIO OUT (COAXIAL/OPTICAL) into linear PCM format ('Yes' or 'No'), then press ENTER. • Proceed to step 8. 20 En