Pioneer DV-C302D Owner's Manual - Page 22

Setting analog audio connections to an AV amplifier or receiver The [Analog Jacks] screen establishes whether analog connections have been made to an AV amplifier or receiver, and if connections are made, whether the connections made are for 2 channel stereo or for 5.1 channel surround sound. To coordinate your speaker system for 5.1 channel output When "5.1 Channel" is selected in the [Analog Jacks] screen, the following screens appear to determine the configuration of your speaker system. In all of the following screens, select "Present" if the speaker in question is present in your system, and "Not Present" if it is not. Audio1 2 Video Language General Setup Navigator Amp Connection 2 Channel Analog Jacks 5.1 Channel Not Connected 2 channel jacks for L/R Move ENTER Select SETUP Exit Settings: 2 Channel* Select if you have made 2 channel connections to an amplifier or receiver. 5.1 Channel Select if you have made 5.1 channel connections to an AV amplifier or receiver with the appropriate inputs. When this setting is selected, several screens will follow to determine the configuration of your speaker system. These screens are described below in the section 'To coordinate your speaker system for 5.1 channel output'. Not Connected Select if you have not made analog audio connections. * Factory setting [Center Speaker] Audio1 2 Video Language General Setup Navigator Amp Connection Center Speaker Present Not Present Center speaker is connected to an amplifier Move ENTER Select SETUP Exit [Surround Speakers] Audio1 2 Video Language General Setup Navigator Amp Connection Surround Speakers Present Not Present Surround speakers are connected to an amplifier Move ENTER Select SETUP Exit [Sub-woofer] Audio1 2 Video Language General Setup Navigator Amp Connection Sub-woofer Present Not Present Sub-woofer is connected to an amplifier Move ENTER Select SETUP Exit Settings: Present* Not Present * Factory setting Note (If "Not Present" is selected for both [Center Speaker] and [Surround Speaker], [Sub-woofer] is automatically set to "Not Present" and the [Sub-woofer] screen is not displayed. 22