Pioneer DV-C302D Owner's Manual - Page 27
Stopping Playback and, Switching Power Off
View all Pioneer DV-C302D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
GETTING STARTED USING YOUR DVD PLAYER 5 Stopping Playback and Switching Power Off - DVD/Video CD/CD 5 2 5 5 5 4 ¢ 1 3 ¡ e 8 E7 1 1 Press STOP 7 (7 on the front panel). Playback stops. 2 Press OPEN/CLOSE 0 (0 on the front panel). • The disc table comes out. • The tray rotates and the disc that was playing is located towards the front on the left side of the table. 3 Remove the discs. STANDBY/ON 0 41 ¡¢ 78 3 4 Press the DISC CHANGE to remove all discs. 5 Press ( STANDBY/ON on the front panel). Resuming playback from where you stopped -- DVD/Video CD With this player, it is possible to resume play of a DVD or Video CD when play has been stopped. 3 24 Press STOP 7 once to enable play to resume from a point shortly before the DVD/Video CD was stopped when PLAY 3 is pressed again. 0 STANDBY/ON 41 ¡¢ • To begin disc playback from the beginning, press 78 3 STOP 7 twice to turn off resume playback, and then start playback again. 5 1 • Pressing STOP 7 twice to causes the disc to return to the beginning when PLAY 3 is pressed again. Note Resume play is only possible when the disc is loaded and STOP 7 has not be pressed twice in succession ("RESUME" ap pears in the display). If you want to continue viewing a DVD at a later time or date, it is recommended to use the Last Memory function described on page 50. 27