Pioneer DV46AV Owner's Manual - Page 16

02 Connecting up Connecting the digital output This player has both optical and coaxial-type digital audio outputs for connection to an AV receiver. Connect whichever is convenient. Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out settings on page 40 and refer to the operating instructions that came with your AV receiver. Note that SACD audio is not output through these jacks, so this connection should be in addition to, rather than instead of, a 5.1 channel analog connection. • Connect one of the DIGITAL AUDIO OUT jacks on this player to a digital input on your AV receiver. DIGITAL IN (OPTICAL) Connecting using HDMI If you have a HDMI equipped monitor or display, you can connect it to this player using a commercially available HDMI cable. The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including DVD-Video, DVD-Audio (see below for limitations), Video CD, CD and MP3. 1 Use an HDMI cable to connect the HDMI OUT interconnect on this player to an HDMI interconnect on a HDMI-compatible monitor. HDMI connector HDMI-compatible display AV receiver DIGITAL IN (COAXIAL) L SW SL PB VIDEO OUT HDMI OUT R C SR PR Y AUDIO OUT (5.1ch) COMPONENT VIDEO OUT S-VIDEO OUT OPTICAL COAXIAL DIGITAL AUDIO OUT For an optical connection, use an optical cable (not supplied) to connect the OPTICAL DIGITAL AUDIO OUT jack to an optical input on your AV receiver. For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver. • The arrow on the cable connector body should be face up for correct alignment with the connector on the player. 16 En