Pioneer DV46AV Owner's Manual - Page 57

Additional information 08 Problem Remedy Cannot play multichannel audio. • Make sure that Audio Output Mode is set to 5.1 Channel (page 46). • Check that the Dolby Digital, DTS and MPEG Out settings (page 40) are suitable for your amplifier/receiver-check the instruction manual that came with your amplifier/receiver. • DVD-Audio and SACDs do not output multichannel digital audio. Listen through the player's analog outputs. • Check that the settings in the Speaker Installation screen are correct (page 48). • Check the audio options available from the disc menu. Cannot listen to highsampling rate audio through the digital output. • Make sure that Linear PCM Out is set to Down Sample Off (page 40). • As a copy-protection measure, some DVDs do not output 96 kHz audio. In this case, even if set to Down Sample Off, the player automatically outputs the audio at 48 kHz. This is not a malfunction. Cannot output 192 kHz or • The player does not output digital audio at these sampling rates. The 176.4 kHz digital audio. digital output is automatically downsampled. Cannot output 96 kHz or 88.2 kHz digital audio. • Check that Linear PCM Out is set to Down Sample Off (page 40). • Some discs are digital copy protected and do not output high sampling rate digital audio. In this case the output is automatically downsampled. No DTS audio output. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to DTS > PCM (page 40). If you do not do this, noise will be output when you play a DTS disc. • If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier settings, and that the cable is properly connected. Audio mix does not sound right or sounds incomplete (for example, inaudible dialog). • Make sure that Audio Output Mode is set to 2 Channel if you've connected to the stereo inputs on your amplifier or TV (page 48). Can't hear effect of Virtual Surround. • Virtual Surround does not work with SACD or DVD-Audio. • The Virtual Surround effect is only output through the AUDIO OUT (2ch) analog audio outputs. • Make sure that Audio Output Mode is set to 2 Channel (page 46). • The effectiveness of Virtual Surround varies with the disc. 57 En