Pioneer Deh-p4800mp Owner's Manual - Page 32
Introduction of audio, adjustments, Using balance adjustment, Audio Adjustments
UPC - 012562776828
View all Pioneer Deh-p4800mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 08 Audio Adjustments Introduction of audio adjustments 1 # You can select the 80: 0 only when subwoofer output is turned on in SUB W. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. 5 43 2 1 Audio display Shows the audio adjustment status. 2 CUSTOM indicator Shows when custom equalizer curve is currently selected. 3 FIE indicator Shows when the front image enhancer is turned on. 4 SW indicator Shows when the subwoofer output is turned on. 5 Loudness indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)EQ (equalizer curve adjustment)LOUD (loudness) SUB W (subwoofer on/off setting)80: 0 (subwoofer setting)HPF (high pass filter) BASS (bass boost)FIE (front image enhancer)SLA (source level adjustment) # When the subwoofer controller setting is P/O :FUL, you cannot switch to SUB W. (Refer to page 38.) Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. FAD :F15 FAD :R15 is displayed as the front/ rear speaker balance moves from front to rear. # FAD : 0 is the proper setting when only two speakers are used. # When the rear output setting is R-SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer output on page 38. 3 Press c or d to adjust left/right speaker balance. When you press c or d, BAL : 0 is displayed. Each press of c or d moves the left/right speaker balance towards the left or the right. BAL : L15 BAL : R15 is displayed as the left/ right speaker balance moves from left to right. 32 En