Pioneer Deh-p4800mp Owner's Manual - Page 34
Adjusting loudness, Using subwoofer output, Audio Adjustments, Adjusting subwoofer settings
UPC - 012562776828
View all Pioneer Deh-p4800mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Section 08 Audio Adjustments 3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. Low: 4080100160 (Hz) Mid: 2005001k2k (Hz) High: 3k8k10k12k (Hz) 4 Press a or b to select the desired Q factor. Press a or b until the desired Q factor appears in the display. 2N1N1W2W Note If you make adjustments, CUSTOM curve is updated. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display. 2 Press a to turn loudness on. Loudness level (e.g., LOUD :MID) appears in the display. 3 Press c or d to select a desired level. Each press of c or d selects level in the following order: LOW (low)MID (mid)HI (high) 4 Press b to turn loudness off. LOUD :OFF appears in the display. Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. 1 Press SW to select SUB W. SUB W appears in the display. # You can also select the subwoofer setting menu by pressing AUDIO on the unit. # When the subwoofer controller setting is P/O :FUL, you cannot select SUB W. 2 Press a to turn subwoofer output on. SUB W:NOR appears in the display. Subwoofer output is now on. # If the subwoofer output phase has been set to the reverse, SUB W:REV will be displayed. # To turn subwoofer output off, press b. 3 Press c or d to select the phase of subwoofer output. Press c to select reverse phase and REV appears in the display. Press d to select normal phase and NOR appears in the display. Adjusting subwoofer settings When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. 1 Press SW to select 80: 0. Press SW until 80: 0 appears in the display. # You can also select the subwoofer setting menu by pressing AUDIO on the unit. # When the subwoofer output is on, you can select 80: 0. # If the subwoofer setting has been previously adjusted, the frequency of that previously selected will be displayed instead of 80. 2 Press c or d to select cut-off frequency. Each press of c or d selects cut-off frequencies in the following order: 506380100125 (Hz) Only frequencies lower than those in the selected range are outputted from the subwoofer. 34 En