Pioneer Deh-p4800mp Owner's Manual - Page 38
Setting the rear output and, subwoofer output, Initial Settings, Press FUNCTION to select AUX1/AUX2. - aux function
UPC - 012562776828
View all Pioneer Deh-p4800mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 09 Initial Settings 1 Press FUNCTION to select AUX1/AUX2. Press FUNCTION repeatedly until AUX1/ AUX2 appears in the display. 2 Press a or b to turn AUX1/AUX2 on or off. Pressing a or b will turn AUX on or off and that status will be displayed (e.g., AUX1 :ON). ! If you change this setting, subwoofer output in the audio menu return to the factory settings. ! Both rear speaker leads outputs and RCA rear output are switched simultaneously in this setting. Setting the rear output and subwoofer output This units rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (R-SP :FUL) or subwoofer (R-SP :S/W) connection. If you switch the rear output setting to R-SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. 1 Press FUNCTION to select R-SP. Press FUNCTION repeatedly until R-SP appears in the display. 2 Press a or b to switch the rear output setting. Pressing a or b will switch between R-SP :FUL (full-range speaker) and R-SP :S/W (subwoofer) and that status will be displayed. # When no subwoofer is connected to the rear output, select R-SP :FUL. # When a subwoofer is connected to the rear output, set for subwoofer R-SP :S/W. # When the rear output setting is R-SP :S/W, you cannot change the subwoofer controller. Notes ! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 34). 38 En