Pioneer FH-X730BS Owner s Manual - Page 10
Bluetooth telephone
View all Pioneer FH-X730BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Menu Item DEL DEVICE [DELETE YES], [DELETE NO] ADD DEVICE Description Delete the device information. Register a new device. A.CONN [ON], [OFF] VISIBLE [ON], [OFF] PIN CODE DEV. INFO GUEST MODE [ON], [OFF] A.PAIRING [ON], [OFF] Select [ON] to connect to a Bluetooth device automatically. Select [ON] so that a Bluetooth device can detect the unit when the unit is connected via Bluetooth to another device. Change the PIN code. 1 Press the M.C. dial to display the setting mode. 2 Turn the M.C. dial to select a number. 3 Press the M.C. dial to move the cursor to the next position. 4 After inputting the PIN code, press and hold the M.C. dial. After inputting the PIN code, pressing the M.C. dial returns you to the PIN code input display, and you can change the PIN code. Switch the device information on the display between the device name and Bluetooth device address. Select [ON] to move to the [DEL DEVICE] screen automatically when the unit has already been paired with three devices. Select [ON] to pair the unit and iPhone automatically when an iPhone is connected to the unit via USB. (This function may not be available depending on the version of iOS you are using.) Bluetooth telephone First, make a Bluetooth connection with the Bluetooth telephone (page 9). Up to two Bluetooth telephones can be connected simultaneously. Important • Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the vehicle's battery. • Be sure to park your vehicle in a safe place and apply the parking brake before operation. To make a phone call 1 Press to display the phone menu. When two phones are connected, a phone name appears first then a phone menu will display. To switch to another phone, press again. 10 En 2 Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm. If you select [PHONE BOOK], proceed to step 4. 3 Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to confirm. 4 Turn the M.C. dial to select a name or phone number, then press to confirm. The phone call starts. To answer an incoming call 1 Press when a call is received. TIP When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call. Basic operations Purpose End a call Reject an incoming call Switch between the current caller and a caller on hold Cancel a caller on hold Adjust the volume of the caller's voice (When private mode is on, this function is not available.) Turn the privacy mode on or off Operation Press . Press and hold when a call is received. Press the M.C. dial. Press and hold . Turn the M.C. dial during the call. Press BAND/ during the call. To preset phone numbers 1 Select a phone number from a phone book or call history. 2 Press and hold one of the number buttons (1/ to 6/ ). The contact is stored in the selected preset number. To make a call using a preset number, press one of the number buttons (1/ to 6/ ), then press the M.C. dial. Voice recognition (Only for iPhone) This function is only available when an iPhone equipped with voice recognition is connected to the unit via Bluetooth.