Pioneer FH-X730BS Owner s Manual - Page 15
Listening to a channel
View all Pioneer FH-X730BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
• Call 1-877-438-9677 4 [SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect Vehicle Tuner has been subscribed successfully. Press any key to clear the activation message. NOTE The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some cases. Do not turn off the unit until you clear the activation message in step 4. Listening to a channel 1 Press and hold DISP, then select [CHANNEL]. You can also select the operation mode by the SiriusXM settings (page 19). 2 Press SRC/OFF to select [SIRIUSXM]. 3 Press BAND/ to select a band from [SXM1], [SXM2] or [SXM3]. 4 Press / to select a channel. Pressing and holding either button will rapidly browse through the channels. Press and hold either button then release to tune automatically. Scanning stops when the unit receives a channel. To cancel seek tuning, press / . Basic operations 1 Press and hold DISP to select the operation mode [CHANNEL] or [REPLAY]. NOTE You can exit the replay mode by pressing and holding BAND/ . Purpose Select a channel Skip backward/forward Fast forward or reverse Operation 1 Set the operation mode to [CHANNEL]. 2 Press or . Pressing and holding either button will rapidly browse through the channels. 1 Set the operation mode to [REPLAY]. 2 Press or . 1 Set the operation mode to [REPLAY]. 2 Press and hold or . NOTE You can also make various adjustments in the SiriusXM settings (page 19). Category scan The live broadcast for each channel in the current category plays for six seconds at a time. Follow the instructions below. To search for a channel from a list 1 Press during playback. 2 Turn the M.C. dial to select a category. 3 Select one of the operations below. Category scan: Press and hold the M.C. dial to switch to category scan. Channel search: Press the M.C. dial to stop a scan. NOTE Press DISP to change the display information between "Channel Name", "Artist Name", "Song Title", "Content Info" and "Channel Number". Scan options Purpose Operation Stopping a scan (selecting the channel or Press the M.C. dial. song playing) Switching to the next/previous song during Press TuneScan or . Switching to the next/previous channel during the category scan Press or . Aborting a scan (The last channel or song Press BAND/ . will continue to play when scan ends.) To preset a channel 1 While receiving a channel you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing. To play the stored channels, select the band and then press a number button (1/ to 6/ ). To preset a channel from a list 1 While receiving a channel you want to store, press . 2 Turn the M.C. dial to select [PRESETS], then press to confirm. 3 Turn the M.C. dial to select a preset channel. 4 Press and hold the M.C. dial to store. En 15 English