Pioneer GM-7150M Service Manual - Page 5

Specifications - dimensions

Page 5 highlights

5 6 7 8 1. SPECIFICATIONS A Power source ...14.4 V DC (10.8 - 15.1 V allowable) Grounding system ...Negative type Current consumption ...33.0 A (at continuous power, 4 Ω) Backup current ...3 mA or less Average current drawn* ...9.0 A (4 Ω for one channel) 16.0 A (2 Ω for one channel) Fuse ...30 A × 2 Dimensions ...300 (W) × 60 (H) × 327 (D) mm Weight ...4.7 kg (Leads for wiring not included) Maximum power output 500 W × 1 (4 Ω) / 800 W × 1 (2 Ω) Continuous power output 250 W × 1 (at 14.4 V, 4 Ω, 20 - 240 Hz 0.5% THD) 360 W × 1 (at 14.4 V, 2 Ω, 20 - 240 Hz 0.8% THD) Continuous power output (DIN power 380 W × 1 (4 Ω) (DIN45324, +B=14.4 V) B Load impedance ...4 Ω (2 - 8 Ω allowable) Frequency response ...10 - 240 Hz (+0 dB, -3 dB) Signal-to-noise ratio ...100 dB (IEC-A network) Distortion ...0.03 % (10 W, 120 Hz) Low pass filter ...Cut off frequency: 40 - 240 Hz Cut off slope: -12 dB/oct Bass Boost ...Frequency: 50 Hz Level: 0/6/9/12 dB Gain control ...RCA: 200 mV - 6.5 V Speaker: 0.8 - 26 V Maximum input level / impedance ...RCA: 6.5 V / 22 kΩ Speaker: 26 V / 40 kΩ Note: C • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. D E F GM-7100M/XU/EW 5 5 6 7 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

5
5
6
7
8
F
E
D
C
B
A
5
6
7
8
GM-7100M/XU/EW
1. SPECIFICATIONS
Power source
..........................................................................................................
14.4 V DC (10.8 — 15.1 V allowable)
Grounding system
..........................................................................................................................................
Negative type
Current consumption
....................................................................................................
33.0 A (at continuous power, 4
)
Backup current
..................................................................................................................................................
3 mA or less
Average current drawn*
..........................................................................................................
9.0 A (4
for one channel)
16.0 A (2
for one channel)
Fuse
........................................................................................................................................................................
30 A
×
2
Dimensions
......................................................................................................................
300 (W)
×
60 (H)
×
327 (D) mm
Weight
....................................................................................................................
4.7 kg (Leads for wiring not included)
Maximum power output
..............................................................................................
500 W
×
1 (4
) / 800 W
×
1 (2
)
Continuous power output
..............................................................
250 W
×
1 (at 14.4 V, 4
, 20 — 240 Hz 0.5% THD)
360 W
×
1 (at 14.4 V, 2
, 20 — 240 Hz 0.8% THD)
Continuous power output (DIN power)
..........................................................
380 W
×
1 (4
) (DIN45324, +B=14.4 V)
Load impedance
..........................................................................................................................
4
(2 — 8
allowable)
Frequency response
..............................................................................................................
10 — 240 Hz (+0 dB, –3 dB)
Signal-to-noise ratio
....................................................................................................................
100 dB (IEC-A network)
Distortion
........................................................................................................................................
0.03 % (10 W, 120 Hz)
Low pass filter
..................................................................................................................
Cut off frequency: 40 — 240 Hz
Cut off slope: –12 dB/oct
Bass Boost
..............................................................................................................................................
Frequency: 50 Hz
Level: 0/6/9/12 dB
Gain control
..................................................................................................................................
RCA: 200 mV — 6.5 V
Speaker: 0.8 — 26 V
Maximum input level / impedance
......................................................................................................
RCA: 6.5 V / 22 k
Speaker: 26 V / 40 k
Note:
Specifications and the design are subject to possible modification without notice due to improvements.
*Average current drawn
The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when
working out total current drawn by multiple power amplifiers.