Pioneer HTP-076 Instruction Manual English - Page 87

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting „„Tuner 93 „„BLUETOOTH function 93 Before starting the procedure „„ZONE B function 94 Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, „„Remote Controller 94 setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the „„Display 94 HDMI linked operation does not work, disconnecting/connecting the HDMI cable „„Others 94 may solve it. When reconnecting, be careful not to wind the HDMI cable since if wound the HDMI cable may not fit well. After reconnecting, turn off and on the unit and the connected device. • The AV receiver contains a microPC for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least 5 seconds, and then plug it back in. • Our company is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. When the unit is operating erratically 88 Try restarting the unit 88 Resetting the unit (this resets the unit settings to the default) 88 Troubleshooting 89 „„Power 89 „„Audio 89 „„Listening Modes 91 „„Video 92 „„Linked operation 92 87 Front Panel≫ Rear Panel≫ Remote≫