Pioneer HTP-076 Instruction Manual English - Page 97

General Specifications, Tuner

Get Pioneer HTP-076 PDF manuals and user guides View all Pioneer HTP-076 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

Contents ≫ Connections ≫ Playback ≫ Setup ≫ General Specifications „„Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. With 8 ohm loads, both channels driven, from 100 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. (SUBWOOFER) Rated Output Power (IEC) (Others) 5 ch × 135 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD 1 ch × 100 W at 6 ohms, 100 Hz, 1 ch driven of 1% THD (SUBWOOFER) Maximum Effective Output Power (North American) 150 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD 120 W at 6 ohms, 100 Hz, 1 ch driven of 10% THD (SUBWOOFER) Maximum Effective Output Power (IEC) 5 ch × 150 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (European) 1 ch × 120 W at 6 ohms, 100 Hz, 1 ch driven of 10% THD (European) (SUBWOOFER) Maximum Effective Output Power (JEITA) 5 ch × 150 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (Asian and Australian) 1 ch × 120 W at 6 ohms, 100 Hz, 1 ch driven of 10% THD (Asian and Australian) (SUBWOOFER) Dynamic Power (*) * IEC60268-Short-term maximum output power 160 W (3 Ω, Front) 125 W (4 Ω, Front) 85 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise) 0.08% (20 Hz - 20,000 Hz, half power) Input Sensitivity and Impedance 200 mV/47 kΩ (LINE (RCA)) Rated RCA Output Level and Impedance 1 V/470 Ω (SUBWOOFER PRE OUT) 1 V/2.3 kΩ (ZONE B LINE OUT) Frequency Response 10 Hz - 100 kHz/+1 dB, -3 dB (Pure Direct) Tone Control Characteristics ±10 dB, 20 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 109 dB (IHF-A, LINE IN, SP OUT) Speaker Impedance 4 Ω - 16 Ω Headphone Rated Output 80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) Supported impedance of Headphones 8 Ω - 600 Ω Headphones Frequency Response 10 Hz - 100 kHz „„Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (Others) 50 dB quieting sensitivity (FM MONO) 1.0 μV, 11.2 dBf (IHF, 1 kHz, 100% MOD) AM Tuning Frequency Range 530 kHz - 1710 kHz (North American) 522/530 kHz - 1611/1710 kHz (Others) Preset Channel 40 97 Front Panel≫ Rear Panel≫ Remote≫

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
97
Front Panel
≫
Rear Panel
≫
Remote
≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
General Specifications
±
Amplifier Section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts
per channel minimum RMS power, with no more than 0.08% total harmonic
distortion from 250 milliwatts to rated output.
With 8 ohm loads, both channels driven, from 100 Hz; rated 80 watts per
channel minimum RMS power, with no more than 0.08% total harmonic
distortion from 250 milliwatts to rated output. (SUBWOOFER)
Rated Output Power (IEC) (Others)
5 ch × 135 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
1 ch × 100 W at 6 ohms, 100 Hz, 1 ch driven of 1% THD (SUBWOOFER)
Maximum Effective Output Power (North American)
150 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD
120 W at 6 ohms, 100 Hz, 1 ch driven of 10% THD (SUBWOOFER)
Maximum Effective Output Power (IEC)
5 ch × 150 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (European)
1 ch × 120 W at 6 ohms, 100 Hz, 1 ch driven of 10% THD (European)
(SUBWOOFER)
Maximum Effective Output Power (JEITA)
5 ch × 150 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD (Asian and
Australian)
1 ch × 120 W at 6 ohms, 100 Hz, 1 ch driven of 10% THD (Asian and
Australian) (SUBWOOFER)
Dynamic Power (*)
* IEC60268-Short-term maximum output power
160 W (3 Ω, Front)
125 W (4 Ω, Front)
85 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance
200 mV/47 kΩ (LINE (RCA))
Rated RCA Output Level and Impedance
1 V/470 Ω (SUBWOOFER PRE OUT)
1 V/2.3 kΩ (ZONE B LINE OUT)
Frequency Response
10 Hz - 100 kHz/+1 dB, –3 dB (Pure Direct)
Tone Control Characteristics
±10 dB, 20 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
109 dB (IHF-A, LINE IN, SP OUT)
Speaker Impedance
4 Ω - 16 Ω
Headphone Rated Output
80 mW + 80 mW (32 Ω, 1 kHz, 10% THD)
Supported impedance of Headphones
8 Ω - 600 Ω
Headphones Frequency Response
10 Hz - 100 kHz
±
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
50 dB quieting sensitivity (FM MONO)
1.0 μV, 11.2 dBf (IHF, 1 kHz, 100% MOD)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (Others)
Preset Channel
40