Pioneer djm909 Owner's Manual - Page 21
EFFECT FUNCTIONS, Fader Effector effects linked to channel or cross fader
UPC - 012562666723
View all Pioneer djm909 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
EFFECT FUNCTIONS Fader Effector (effects linked to channel or cross fader) Name Function 36 FADER ROLL (*2) EFFECT switch turn ON or fader position is used as trigger to record input sound, and then output the sound repeatedly within range of 1/1 to 1/16 beat. 37 FADER MULTI TAP DELAY At preset intervals repeat sound is output at (*1) 1/1 to 1/16 beat set with fader. 38 FADER TRANS PAN 39 FADER PITCH SHIFTER 40 FADER RING In time with the BPM, long-period PAN output is cut at time corresponding to fader position. In response to fader position, pitch of input sounds is changed. Produces metallic bass sound effect. 41 FADER VOCODER1 42 FADER VOCODER2 43 FADER FILTER (LPF) 44 FADER FILTER (HPF) 45 FADER FILTER (BPF) 46 FADER FLANGER 47 FADER PHASER Vocoder effect; modulates internal oscillator sound in response to input sound. Depending on fader position, changes internal oscillator sound's fundamental frequency. 7 code sounds can be added. Changes low-pass filter's cutoff frequency, depending on fader position. Changes high-pass filter's cutoff frequency, depending on fader position. Changes band-pass filter's center frequency depending on fader position. Changes frequency band subjected to flanger effect, depending on fader position. Changes frequency band subjected to phaser effect, depending on fader position. 48 FADER SYNTHE1 Outputs sine wave sound source. 49 FADER SYNTHE2 Outputs sawtooth wave sound source. 50 FADER SYNTHE3 Outputs square wave sound source. FX ADJ. Parameter (touch panel) Select either channel fader or cross fader. Set base ROLL time to 1/2, 1/1, or 2/1. Select either channel fader or cross fader. Set basic beat time of 1/2 to 2/1 for each BPM beat, and set delay pattern selection. Select either channel fader or cross fader. Set PAN operation period and basic effect time to be cut with fader. Select either channel fader or cross fader. Set type of pitch change. Select either channel fader or cross fader. Set frequency of sound effect. Select either channel fader or cross fader. Set code type. Select either channel fader or cross fader. Select either channel fader or cross fader. Select either channel fader or cross fader. Select either channel fader or cross fader. Select either channel fader or cross fader. Set number of filter stages producing phase effect. Greater numbers of stages produce deeper effects. Select either channel fader or cross fader. Select frequency equivalent to note "DO". Select either channel fader or cross fader. Select frequency equivalent to note "DO". Select either channel fader or cross fader. Select frequency equivalent to note "DO". (*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor SELECT switch is set to the [EFFECT] position. (*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT] position. 21