Polaroid IP300W IP300 Polaroid Wireless Surveillence Camera Manual - Page 21
You Can Run Your Mouse Over The Icons For Pc And Gateway
View all Polaroid IP300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Polaroid • Settings SETTINGS AND SEARCHING FOR THE NETWORK PATH, ONCE IT COMES UP YOU CAN RUN YOUR MOUSE OVER THE ICONS FOR PC AND GATEWAY TO ASCERTAIN YOUR SYSTEM ADDRESSES.) Set Port Forwarding in the router. It is important to set the port forwarding in your router to the IP of your camera directly in order for the camera to work correctly. Because there are countless routers from around the world, it is impossible to provide a universal method of set up. The following samples however, do provide methods for several common router systems: TP-LINK: 1. Login the router. 2. Choose "Forwarding", select "Virtual Servers" 3. Click the Add New Button (an example of the pop-up is below) Polaroid • Settings BELKIN: 1. Login router 2. Choose "Firewall", select "Virtual Servers" 3. Input the port (except 80) and IP address, then click SAVE. NOTE: The port and IP address should be same as camera. Figure 7.5 4. Fill in the service port (exception is 80), IP address of camera, then click SAVE. NOTE: The port and IP address should be same as camera. Figure 7.6 40 IP300 Manual 41