Polaroid IP300W IP300 Polaroid Wireless Surveillence Camera Manual - Page 22

embedded Web UI Version, Alias, Alarm Status, DDNS Status and UPnP Status.

Page 22 highlights

Polaroid • Settings DLINK: 1. Login the router 2. Choose "Advanced", select "Virtual Servers" 3. Input the port, IP address, Protocol, then click SAVE. NOTE: The public port and the private port should be the same as the camera's port; choose protocol to be "both" Polaroid • Settings 3.8 System Settings Figure 7.9 Figure 7.7 After all steps are complete you may use DDSN freely. or check the DDNS status from your camera and get the DDNS link for internet view. See figure below. Steps: Login, System, Device Info in that order. 3.8.1 Device Info Figure 8.0 This will give information about the following: Device ID, Firmware Version, embedded Web UI Version, Alias, Alarm Status, DDNS Status and UPnP Status. Figures 7.8 42 IP300 Manual Figure 8.1 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

42
43
IP300 Manual
Figure 7.9
3.8 System Settings
Figure 8.0
3.8.1 Device Info
This will give information about the following: Device ID, Firmware Version,
embedded Web UI Version, Alias, Alarm Status, DDNS Status and UPnP Status.
Figure 8.1
DLINK:
1. Login the router
2. Choose “Advanced”
, select “Virtual Servers”
3. Input the port, IP address, Protocol, then click SAVE.
NOTE: The public port and the private port should be the same as the camera’s
port; choose protocol to be “both”
Figure 7.7
After all steps are complete you may use DDSN freely. or check the DDNS status
from your camera and get the DDNS link for internet view. See figure below.
Steps: Login, System, Device Info in that order.
Figures 7.8
Polaroid
Settings
Polaroid
Settings