Poulan 20112x92e0 User Manual - Page 5

• Never attempt to make wheel height adjustments while the engine is running. • Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. • Do not change the engine governor setting or overspeed the engine. • Maintain or replace safety and instruction labels, as necessary. WARNING:This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest authorized service center. PRODUCT SPECIFICATIONS Gasoline Capacity / Type: Oil Capacity: Oil Type (API SG-SL): Spark Plug: Blade Bolt Torque: 1.0 Quarts (0,94 Litres) Unleaded Regular 20 Ounces (0,58 Litres) SAE 30 (above 0°C/32°F); SAE 5W-30 (below 0°C/32°F) Champion RJ19LM (Gap: 0.30" / 0,76 mm) 35-40 ft. lbs. (47-54 N-m) Parts Bag contents (shown full size) Lower Handle Upstop Bracket Rope Guide (4) Hex Head Bolts 3/8-16 x 3/4 (4) Washers (4) Flangelock Nuts (1) Hex Washer Head Self-Tapping Screw #10-24 x 1/2 Upper Handle Discharge Guard (1) Locknut 1/4-20 (2) Hex Head Bolts 1/4-20 x 1-1/2 (2) Locknuts Wheels (2) Hex Head (2) Nylock Bolts 1/4-20 (2) Washers Nuts 1/4-20 (4) Shoulder Bolts (4) Locknuts 3/8-16 (4) Spacers 1" 5 (2) Washers 1-1/4"