Poulan 20112x92e0 User Manual - Page 6

Parts packed separately in carton (1) Control Bar (1) Upper Handle (1) Lower Handle Parts Bag Contents (not shown full size) (1) Rope Guide (2) Wire Ties (4) Wheels (1) Discharge Guard (1) Engine Zone Control Cable (1) Upstop Bracket ASSEMBLY / PRE-OPERATION CAUTION: Do not operate this mower TOOLS REQUIRED FOR ASSEMBLY without the discharge guard or an entire A socket wrench set will make assembly approved grass catcher in place. These easier. Standard wrench sizes are listed. guards are for your protection and are required by the American National Stan- (1) 5/16" Wrench (1) Adjustable Wrench dards Institute and Consumer Products (1) 7/16" Wrench (1) 9/16" Wrench Safety Commission. (1) 1/2" Wrench (1) 3/4" Wrench CAUTION: Disconnect spark plug wire from spark plug and place wire where it When right hand or left hand is mentioned cannot come in contact with plug. in this manual, it means when you are Read these instructions and this manual in standing in the operating position, behind its entirety before you attempt to assemble the handle. or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. UNPACK CARTON 1. Remove all loose parts from carton. 2. Examine all items. Compare with list of Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. unassembled parts and hardware. 3. Remove lawn mower housing with care. Avoid touching blade under housing. Always wear gloves or other protection when working under or lifting mower. To ensure safe and proper operation of your lawn mower, all parts and hardware ASSEMBLE LOWER HANDLE you assemble must be tightened securely. NOTE: For ease of lower handle as- Use the correct tools as necessary to sembly, raise rear of mower housing and ensure proper tightness. 6 block securely.