Poulan C36C User Manual - Page 10
WHEEL WEIGHTS See Fig. 11, Use Hardware -GROUP H, UPPER CHUTE, See Figs. 10A & 10B, No hardware
View all Poulan C36C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 UPPER CHUTE (See Figs. 10A & 10B) No hardware required 1. Lower mower deck to its lowest cutting position. 2. Assemble upper chute by inserting curved end into hole in back of cover. NOTE: Handle carefully so as not to damage full bag indicator. 3. Push in and turn upper chute until it is in line with lower chute. 4. Align the bosses on lower chute with alignment slots on upper chute and slide together. 5. Secure with rubber latch by hooking hole in latch over latch pin. 11 WHEEL WEIGHTS (See Fig. 11) Use Hardware - - GROUP "H" 1. Assemble wheel weights and U-bolts onto the outside of front wheels and hold in position. 2. Fasten locknuts onto U-bolts on the inside of wheel and tighten securely. LOCKNUTS FRONT WHEEL WHEEL WEIGHT U-BOLT UPPER CHUTE COVER FULL BAGGER INDICATOR HANDLE 02099 LOWER CHUTE FIG. 11 12 LEVEL MOWER DECK Be sure deck is properly leveled for best mower performance. See your tractors owner's manual for instructions. FIG. 10A ALIGNMENT SLOTS LATCH PIN 02098 RUBBER LATCH BOSSES FIG. 10B 10