ProForm 280 Zlx Bike Uk Manual - Page 8

5. The Console (16) requires four AA batteries (not included); alkaline batteries are recommended. 5 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the screw, remove the battery cover, and insert the batteries into the battery compartment. Then, reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compart- ment. Screw Battery Cover Batteries 6. While another person holds the Console (16) near the Upright (13), connect the console wire 6 to the Upper Wire Harness (23). Next, connect the console pulse wires to the Pulse Wires (59). Insert the excess wire downward into the Upright (13). Tip: Avoid pinching the wires. Attach the Console (16) to the Upright (13) with four M4 x 15mm Screws (48). Pulse Wires 59 16 Console Wire 8