ProForm 400 C Treadmill Uk Manual - Page 6

ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver mallet , adjustable wrench , and wire cutters . , rubber For help identifying the assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST in the center of this manual. The number following the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it has been pre-assembled. To avoid damaging plastic parts, do not use power tools for assembly. 1/4" Star Washer (8)-2 Handrail Star Washer (11)-4 Upright Star Washer (6)-4 Upright Washer (7)-2 Frame Washer (99)-2 Nut (12)-2 Silver Ground Screw (10)-2 Console Bolt (2)-2 3/4" Screw (3)-6 Handrail Bolt (9)-4 Frame Bolt (1)-2 Upright Bolt (4)-4 6