ProForm 400 Zlt Treadmill Uk Manual - Page 9

7. Route the Upright Wire (28) through one of the Handrails (18) as shown. Attach the Handrail (18) to the Right Upright (36) with two 5/16" x 2 1/4" Bolts (20) and two 5/16" Star Washers (19). Be careful not to pinch the Upright Wire (28). Attach the other Handrail (18) to the Left Upright (31) with two 5/16" x 2 1/4" Bolts (20) and two 5/16" Star Washers (19). Firmly tighten the four Bolts. 7 20 19 18 31 20 19 18 28 36 8. Insert the included plastic tie through the indicated hole in the right Handrail (18). Make sure that the Upright Wire (28) is secured to the inside of the Handrail as shown. Then, tighten the plastic tie. Remove the wire tie from the Upright Wire (28). 8 28 Plastic Tie 18 Hole Wire Tie 9. While another person holds the Console Base (26) near the right Handrail (18), attach the ground wire on the Console Base to the right Handrail with a #8 x 1/2" Ground Screw (27). Connect the wire harness on the Console Base (26) to the Upright Wire (28) as shown in the inset drawing. If the connectors are oriented correctly, they will slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. 9 26 Wire Harness 27 Ground Wire 28 18 Wire Harness 28 9