ProForm 445i Treadmill English Manual - Page 8
into place. IF THE CONNECTORS ARE NOT CON
View all ProForm 445i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Hold the Crossbar (88) between the Handrails (123, 4 124). Make sure that the square hole in the Crossbar is on top as shown. Attach the Crossbar with two 2 1/2" 123 56 Bolts (56). Do not tighten the Crossbar Bolts yet. 88 Square Hole 124 56 5. Attach the Weight Rack (125) to the brackets on the Left and Right Uprights (9, 10) with four Weight Rack Bolts (121) and four Nuts (122). Attach all of the Weight Rack Bolts and Nuts before tightening any of them. Firmly tighten the four 2 1/2" Bolts (56). Next, firmly tighten the two 4" Bolts (120). 5 56 121 56 121 122 125 9 120 10 122 120 6. Have a second person hold the Console (78) near the Right Upright (10). Attach the ground wire from the Console to the Right Upright with the 1/2" Silver Screw (107). 6 78 Ground Wire Connect the Upright Wire Harness (17) to the wire har- 107 ness on the Console (78). Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. IF THE CONNECTORS ARE NOT CON- NECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN THE POWER IS TURNED ON. Insert the connectors into the Console. 10 17 17 8