ProForm 450 Le Elliptical English Manual - Page 11

9. Insert the Pulse Wires (118) upward through the Upright (3) as shown. 9 3 118 118 10. Attach the Tablet Holder (121) to the Console (5) with four #8 x 16mm Screws (112); start all the 10 Screws, and then tighten them. 5 121 112 11. While a second person holds the Console (5) near the Upright (3), plug the Upper Wire Harness (48) and the Pulse Wires (118) into the receptacles on the Console. The connectors on the Upper Wire Harness (48) and the Pulse Wires (118) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the Console (5) may become damaged when you use the elliptical. Insert the excess wire into the Upright (3). Tip: Avoid pinching the wires. Attach the Console (5) to the Upright (3) with four M4 x 16mm Screws (103); start all the Screws, and then tighten them. 11 5 Avoid pinching the wires 118 3 48 103 11