ProForm 450 Le Elliptical English Manual - Page 16

HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER ADAPTER IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before plugging in the power adapter. If you do not do this, you may damage the console displays or other electronic components. Plug the power adapter into the receptacle on the console. Then, plug the power adapter into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. Power Adapter HOW TO FOLD AND UNFOLD THE ELLIPTICAL When the elliptical is not in use, the frame can be folded out of the way. First, lift the latch under each pedal arm, and lift the pedal arms off the sleeves on the crank arms. Crank Arm Pedal Arm Latch Sleeve Handle Pedal Arm Magnet Frame Latch Button To use the elliptical, first hold the handle, press the latch button, and lower the frame. Next, pull the pedal arms off the magnets on the upper body arms. Then, lift the latches under the pedal arms, and set the pedal arms on the sleeves on the crank arms. Release the latches, and make sure that the pedal arms are securely connected to the crank arms. HOW TO MOVE THE ELLIPTICAL To move the elliptical, first fold it as described at the left. Next, stand in front of the elliptical, hold the upright, and place one foot against the center of the front stabilizer. Pull the upright until the elliptical will roll on the front wheels. Carefully move the elliptical to the desired position, and then lower it. See the upper drawing at the right. Raise the pedal arms until they touch the magnets on the upper body arms; the magnets will hold the pedal arms in place. Then, hold the handle and lift the frame until it locks in a vertical position. Upright Place your foot here 16