ProForm 510 E Elliptical English Manual - Page 10

4. With the help of a second person, place some of the packing materials (not shown) under the 4 front of the Frame (1). Have the second per- son hold the Frame to prevent it from tipping while you complete this step. Attach the Front Stabilizer (6) to the Frame (1) with two M10 x 122mm Screws (104) and two M10 Split Washers (105). Remove the packing materials from under the front of the Frame (1). 6 104 105 1 5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). 5 See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie to the Upper Wire (110). Then, pull the upper end of the wire tie until the Upper Wire is routed through the Upright. 4 Tip: To prevent the Upper Wire (110) from 110 falling into the Upright (4), secure the Upper Wire with the wire tie. Wire Tie 1 Wire Tie 110 10