ProForm 705 Zlt Treadmill Uk Manual - Page 16

OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturerrecommended power cord. DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Follow the steps below to plug in the power cord. 2. If you are plugging in the power cord in Australia, go to step 3. If you are plugging in the power cord in the UK, first press the pins on the power cord into the metal clips in the adapter as shown. Close the adapter cover over the end of the power cord and tighten the screw in the adapter. IMPORTANT: Make sure that the screw is tightened into the adapter cover. Then, go to step 3. Screw Adapter Cover Pins Adapter Metal Clips 3. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. UK Outlet Australia Outlet 1. Plug the indicated end of the power cord into the socket on the treadmill. Socket on Treadmill Power Cord 16