ProForm 725tl English Manual - Page 8

HOW TO USE THE PULSE SENSOR The unique headband-style pulse sensor is specially designed for greater accuracy, comfort, and durability. To get the best performance from the pulse sensor, please read the following instructions. HOW TO ADJUST THE HEADBAND For the pulse sensor to function properly, the headband should fit snugly around your head, without being uncomfortable. To adjust the headband, insert the adjustment tab Adjustment Tab through one of the holes in the head- Headband band. Note: Each time you exer- cise, the headband may expand slightly during the first few minutes of use. It may be necessary to readjust the headband periodically. HOW TO PUT ON THE PULSE SENSOR Rub your forehead briefly to stimulate circulation. Put on the headband as shown below, with the sensor window centered on your forehead. Make sure that there is no hair between the sensor window and your forehead. Attach the clothes clip to your collar. The clothes clip will reduce the movement of the pulse sensor wire, helping to ensure accurate pulse readings. DISPLAY). For the best results, remember the following important guidelines: 1. Before putting on the headband, rub your forehead briefly to stimulate circulation. 2. Make sure that the headband fits snugly, without being uncomfortable. If the headband is too loose or too tight, your pulse may not be detected. 3. The headband must be worn with the sensor window centered on your forehead. Make sure that there is no hair between the sensor window and your forehead. Make-up applied to the forehead may interfere with pulse readings. Note: If the pulse sensor does not detect your pulse when the sensor window is centered on your forehead, try positioning the sensor window above your right or left eyebrow. Depending on the shape of your forehead, it may be easier to detect your pulse from a different position. 4. Make sure that the pulse sensor wire is fully plugged into the jack on the console. 5. Because your pulse constantly changes, the pulse sensor will sample your pulse every few seconds. When you first put on the pulse sensor, it may take up to ten seconds for an accurate pulse to be shown. 6. Avoid excessive head movement during exercise. 7. The sensor window should be cleaned weekly when the treadmill is used regularly. Moisten a cotton swab with water, and carefully wipe the sensor window. HOW TO SOLVE COMMON PULSE PROBLEMS Headband Sensor Window 1. If you are wearing the pulse sensor and the NO PULSE DETECTED indicator lights, refer to guidelines 2, 3, 4, 5, 6, and 7 above. Wire Clothes Clip 2. If the pulse shown in the PULSE display seems excessively high or low, refer to guideline 5. 3. If error code "E5" appears in the PULSE display, refer to guidelines 2, 3, 4, 5, 6, and 7. IMPORTANT: To avoid static build-up that may damage the console, wear the pulse sensor only while you are on the treadmill. 4. If the letters "PLS" appear in the PULSE display, refer to guidelines 2, 3, 4, 5, 6, and 7. CLEANING THE PULSE SENSOR AND HEADBAND GUIDELINES FOR ACCURATE PULSE READINGS Remove the headband from the pulse sensor. Wipe the pulse sensor with a damp cloth; never immerse The instructions on page 12 explain how the pulse the pulse sensor in water. Hand wash the headband 8 sensor is used with the console (see PULSE in mild detergent, gently wring it out, and let it air dry.