ProForm 770s English Manual - Page 12
Maintenance, Storage
View all ProForm 770s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
MAINTENANCE AND STORAGE Inspect and tighten all parts of the PROFORM 770S regularly. The 770S can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight. BATTERY REPLACEMENT If the console does not function properly, the batteries should be replaced. To replace the batteries, see assembly step 4 on page 7. HANDLEBAR LUBRICATION If a squeak is heard when the Handlebars (5, 6) are moved, a small amount of grease should be applied. CRANK ADJUSTMENT If the arms of the Crank (17) become loose, they should be tightened in order to prevent excessive wear. Loosen the Crank Nut (24) on the left arm of the Crank. Place the end of a standard screwdriver in one of the slots in the Slotted Crank Nut (22). Lightly tap the screwdriver with a hammer to turn the Slotted Crank Nut counterclockwise until the arms are no longer loose. Do not overtlghten the Slotted Crank Nut. When the Slotted Crank Nut is properly tightened, tighten the Crank Nut. 22 24 4 10 16 11 14 5 53 6 17 HOW TO STORE THE PROFORM 770S When the 770S is not in use, it can be folded for compact storage. Refer to the drawing below. Loosen the Lock Knob (38). Slide the Handlebar Frame (2) into the Frame (1) as far as it will go. Tighten the Lock Knob. Store the 770S indoors, away from moisture and dust. Remove the Lock Pin (53). Turn the Resistance Dial (11) counterclockwise and remove it. Remove the M10 Star Washer (14). Using pliers, grip the head of the 3/8" x 6" Carriage Bolt (16) and remove it. Apply a thin film of grease to both sides of the Handlebar Housings (72). Reattach all parts, making sure that they are in the positions shown. 38 2 12