ProForm 900 Elliptical Uk Manual - Page 6
Tighten two Feet 26 and two Rear Foot
View all ProForm 900 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. Remove the screws and the metal shipping bracket (not shown) from the underside of the Frame (2). Discard the screws and the shipping bracket. While a second person tips the Frame (2) backward, attach the Front Stabilizer (98) to the Frame with two M10 x 88mm Patch Screws (104) and two M10 Split Washers (72). 2 98 72 104 2. Carefully tip the Frame (2) onto its side. Orient 2 the Base (1) as shown, and then insert the Base into the Frame. Attach the Base with two M10 x 62mm Patch Screws (97), two M10 Spacers (76), two M10 x 48mm Patch Screws (78), and two M10 Split Washers (72). Tighten two Feet (26) and two Rear Foot Spacers (102) into the underside of the Base (1). Then, carefully tip the elliptical exerciser to an upright position. 26 2 1 76 72 78 97 1 102 26 6