ProForm 940 Ce Elliptical English Manual - Page 11

9. Identify the Right Handlebar (31) and orient it as shown. Attach the Right Handlebar to the right 9 Upper Body Arm (12) with two 5/16" x 1 1/2" Bolts (73) and two 5/16" Locknuts (106). Make sure that the Locknuts are in the hexagonal holes. Repeat this step to attach the Left Handlebar (7) to the left Upper Body Arm (12). 7 73 12 31 106 Hexagonal Holes 12 10. Plug the Power Cord (55) into the power socket at the rear of the elliptical (see HOW 10 TO PLUG IN THE POWER CORD on page 12). IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before plugging in the power cord. If you do not do this, the con- sole displays or other electronic components may become damaged. Note: When you plug in the elliptical for the first time (see HOW TO PLUG IN THE POWER CORD on page 12), the Ramp (not shown) will calibrate automatically. The Ramp will move upward and downward as it calibrates. 55 When the Ramp stops moving, the Ramp is calibrated. IMPORTANT: If the Ramp (not shown) does not calibrate automatically, see HOW TO CALIBRATE THE RAMP on page 22 and manually calibrate the Ramp. 11. Make sure that all parts of the elliptical are properly tightened. Note: Extra parts may be included. To protect the floor or carpet from damage, place a mat under the elliptical. 11