ProForm 940 Ce Elliptical English Manual - Page 7
Assembly
View all ProForm 940 Ce Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • In addition to the included tool(s), assembly requires the following tool(s): one Phillips screwdriver one adjustable wrench one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.proformservice.com/registration on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) and register your product. 2. With the help of another person, place two packing inserts from the packing material under the 2 rear of the Frame (1) so that the Frame is lifted off the floor. Have another person hold the elliptical to prevent it from moving from side to side until this step is completed. Attach the Rear Stabilizer (3) to the Frame (1) with four 5/16" x 2 1/2" Screws (88). Then, remove the packing inserts and lower the Rear Stabilizer. 1 3 88 88 7